Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the starter motor on the Ford S-Max?

Model: Ford S Max MK 1 - Years 2006-2016
Part: Starter motor

To replace the starter motor on the Ford S-Max, open the bonnet to access the components within the engine bay: you will need to remove the cover from the top of the engine block to reach the underlying components. The starter motor is located at the front, between the engine block and the gearbox: by unscrewing the securing bolts, you can remove it and disconnect the connectors. This will allow you to fit the new replacement part, reassembling all previously removed components.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford S Max (2006-2016 / MK 1) To replace the starter motor on the Ford S-Max, it is necessary to lift the car using a ramp or a jack. This will allow you to loosen the bolts secur…
Ford S Max (2006-2016 / MK 1) If the starter motor does not activate when turning the key to the ignition position, it is possible that the excitation relay of the solenoid, which…
Ford S Max (2006-2016 / MK 1) In this video, you will see how to replace the battery in a Ford S-Max (or a Galaxy, the procedure is identical). The battery is located at the rear …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos