Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulb on the Ford S-Max?

Model: Ford S Max MK 1 - Years 2006-2016
Part: Light bulb

To replace the third brake light bulb on the Ford S-Max, lift the tailgate of the boot and unclip the clips from inside the third brake light housing. Once the clips are released, you can pull the light out from the outside and remove the bulb from its housing without disconnecting any connectors. After removing the bulb, replace it with a new one. Once the new bulb is inserted, refit the third brake light into its housing and check its proper functioning.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulb on a Ford S-Max
How to Replace the Number Plate Bulb on a Ford S-Max
Ford S Max (2006-2016 / MK 1) Using a small flathead screwdriver, start by removing the outer cover of the bulb on your Ford S-Max. This will give you access to the blown bulb. Pr…
How to Replace the Front Headlamp Bulb on a Ford S-Max?
How to Replace the Front Headlamp Bulb on a Ford S-Max?
Ford S Max (2006-2016 / MK 1) To replace the front headlamp bulb on a Ford S-Max, open the bonnet and unscrew the bolts securing the headlamp at the top, using the two supports. O…
How to Replace the Third Brake Light Bulb on the Ford S-MAX?
How to Replace the Third Brake Light Bulb on the Ford S-MAX?
Ford S Max (2006-2016 / MK 1) .. In this tutorial, you will see how to replace the third brake light bulb on the Ford S-MAX, a very simple and quick operation. Before.. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos