Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

Video tutorial

In this video, we will show you how to remove the cabin air filter from a Jeep Renegade. Pry off the plastic cover located on the right side of the dashboard with a spatula.

Open the glove compartment and unscrew the securing screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment after disconnecting the power cables.

Remove the cover plate acting as a cap and slide out the air filter from its housing as shown in the video. Finally, insert the new filter and reassemble all components of the glove compartment as you disassembled them earlier. -Plastic spatula -Screwdriver with bits.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on a Jeep Renegade
How to Replace the Pollen Filter on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) How to replace the pollen filter on a Jeep Renegade? Unscrew the screws located on the right side of the dashboard, then remove the glove compartment…
How to Replace the Cabin Filter on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today, you will learn how to replace the cabin filter on your Jeep Renegade. First, open the glove compartment and undo the three screws located at t…
How to Replace the Cabin Filter on a 2017 Jeep Renegade
How to Replace the Cabin Filter on a 2017 Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Discover how to quickly and safely replace the cabin air filter on your 2017 Jeep Renegade. First, completely switch off the vehicle and move to the …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos