Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a 2017 Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Cabin air filter

Discover how to quickly and safely replace the cabin air filter on your 2017 Jeep Renegade. First, completely switch off the vehicle and move to the passenger seat. Open the glove compartment and unclip the safety hooks to remove it entirely. Once this is done, locate the air filter box at the rear and remove the safety support by unscrewing the screws. Finally, take off the cover of the box and proceed with replacing the filter.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) In the 2016 Jeep Renegade, the cabin air filter is located under the dashboard on the passenger side, behind the glove compartment. The position of t…
How to replace the cabin air filter of the Jeep Renegade
How to replace the cabin air filter of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the cabin air filter in your Jeep Renegade by yourself, you must follow the steps described in the following guide. First, purchase a new …
Replace Cabin Filter on Jeep Renegade
Replace Cabin Filter on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video guide, you will learn how to remove and replace the cabin filter of a Jeep Renegade. First, get in the vehicle from the passenger side …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos