Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Jeep Compass located?

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Dashboard

See other generations:
Video tutorial

If you don't know where the OBD port is located inside your first-generation Jeep Compass, don't worry because thanks to the procedure described in the following guide, you will be able to locate it in a few seconds and in total safety. First of all, go inside the car, specifically the driver's seat.

Make sure your Jeep Compass is completely turned off and then focus your attention on the lower right side of the dashboard. At this point, remove the protective cover in order to finally access the OBD port you were looking for.


Posted on 3 January 2025 by ScegliAuto


Related tutorials

Where is the OBD2 port located in the 2007 Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) If you are curious to find out where the OBD2 port of your first series Jeep Compass (year 2007) is located, then all you have to do is read the foll…
Where is the OBD2 port located in the Jeep Compass?
Where is the OBD2 port located in the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To quickly find the OBD2 port of your first generation Jeep Compass, you must first carefully read the following guide and then follow all the variou…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on a Jeep Compass, connect a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once conne…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos