Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located in the Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Checks and maintenance

To quickly find the OBD2 port of your first generation Jeep Compass, you must first carefully read the following guide and then follow all the various steps described. Start by reaching the driver's seat inside the cabin, then make sure the instrument panel is turned off. At this point, shift your attention to the bottom of the dashboard and then locate the OBD2 port located on the left side. The procedure is now successfully completed, but you can connect a diagnostic tool to the OBD2 port if needed.

Posted on 18 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located in the 2007 Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) If you are curious to find out where the OBD2 port of your first series Jeep Compass (year 2007) is located, then all you have to do is read the foll…
How do you reset the Service light of the Jeep Compass?
How do you reset the Service light of the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In order to reset the Service light of the Jeep Compass, you need to connect a diagnostic tool to the OBD port of the vehicle, which is located immed…
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) The cigarette lighter fuse on your Jeep Compass is located inside the fuse box. The fuse box is situated within the engine bay, near the battery. To …

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2006-2016 - What does "SDW not working" mean on the Jeep Compass? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos