Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Filter on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

Video tutorial

How to remove the cabin filter on a Jeep Renegade? Follow these steps for disassembly. Remove the glove compartment from the dashboard using a lever; unscrew the securing screws on the side with a screwdriver.

Remove the black plastic cover in the glove compartment; take out the worn filter and extract it from its housing. Insert a new cabin filter into the designated compartment.

Finally, reassemble the glove compartment and tighten the screws. Check the correct assembly of the parts and test their proper functioning.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) In the 2016 Jeep Renegade, the cabin air filter is located under the dashboard on the passenger side, behind the glove compartment. The position of t…
How to Remove the Cabin Air Filter from a Jeep Renegade
How to Remove the Cabin Air Filter from a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Using a screwdriver, unscrew the securing screws of the glove compartment located under the dashboard. Remove the glove compartment using a lever (wh…
How to Replace the Cabin Filter on a Jeep Renegade
How to Replace the Cabin Filter on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video, we will show you how to remove the cabin air filter from a Jeep Renegade. Pry off the plastic cover located on the right side of the d…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos