Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Speakers on Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Checks and maintenance

See other generations:
Video tutorial

If the door speaker is damaged, it needs replacing. Here's how to remove it on a Jeep Grand Cherokee.

Use a lever to remove the plastic trim at the corner of the window. Using a screwdriver, unscrew the securing screws located in the plastic handle and in the area of the door opening lever.

Once all screws are removed, detach the door panel. Pull the door panel off by hand, disconnect any power connectors and release cables.

Unscrew the side screws of the speaker embedded in the door with a screwdriver. Install the new speaker and reattach the door panel.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To independently locate the fuse box in your 2004 Jeep Grand Cherokee, carefully read the following guide where we will assist you step by step. Firs…
What is the radio code for a Jeep Grand Cherokee and how to enter it?
What is the radio code for a Jeep Grand Cherokee and how to enter it?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitt…
Where to Find the OBD Port on a Jeep Grand Cherokee
Where to Find the OBD Port on a Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / WL, MK 5) To find the OBD port on your new Jeep Grand Cherokee, follow these steps. First, enter the cabin from the driver's side, ensuring that your Jeep Gran…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos