Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the radio code for a Jeep Grand Cherokee and how to enter it?

Model: Jeep Grand Cherokee MK 2, WJ - Years 1998-2004
Part: Warning light – error code

After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitting in the driver's seat, then activate the dashboard and the radio. Once done, enter the code "1513" by pressing the numbered buttons on the front of the radio in sequence. Once you have entered the unlock code, the radio in your Jeep Grand Cherokee will automatically unlock, and you will have correctly completed the procedure.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Remote Key Battery for a Jeep Grand Cherokee
Replacing the Remote Key Battery for a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this tutorial video, you will see how to disassemble and replace the battery of the remote key for a Jeep Grand Cherokee. Take your remote in hand…
How to Remove the Radio from a Jeep Grand Cherokee
How to Remove the Radio from a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) How do you remove the radio from a Jeep Grand Cherokee? Start by removing the trim around the radio and the air conditioning controls. Next, undo the…
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) To independently locate the fuse box in your 2004 Jeep Grand Cherokee, carefully read the following guide where we will assist you step by step. Firs…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos