Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to remove the exterior door handle on Jeep Grand Cherokee

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years 2004-2010
Part: Handle
Operation: How to remove the exterior door handle on Jeep Grand Cherokee

In this video we see the instructions for removing the external rear door handle on a third series Jeep Grand Cherokee. First we open the door and go to remove the door panel; to do this, remove all the fixing screws that we find on the sides of the panel and on the opening handle. Once the panel has been removed, disconnect the handle cable and the electric connector of the window lifter button; now, with a socket wrench, we unscrew the rear fixing screws of the external handle. We just have to unhook the fixing pin and remove the handle!


Posted on 14 January 2024 by ScegliAuto



How do you replace the outside rearview mirror on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) In order to replace the exterior rearview mirror of the Jeep Grand Cherokee, you need to remove the door panel, unscrewing the screws located in the
How to remove the exterior mirror mirror of a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) We see the removal of the exterior mirror mirror of a Jeep Grand Cherokee. With a lever with a plastic (rubber) coating, we go to pry between the per
Removal of the rear door panel of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Let's see in this guide how to remove and replace the rear door panel of the Jeep Grand Cherokee, following these simple steps. First of all we open

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos