Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switch Panel on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Window switch

See other generations:
Video tutorial

Before you begin, open the driver's door of your Jeep Grand Cherokee. Using a thin but sturdy tool as a lever, start by unclipping the window switch panel from its housing.

This will free the window switch panel itself. Next, extract the panel from its housing and disconnect the corresponding electrical connector.

Once you have completed this step, you can fully remove the window switch panel from your Jeep Grand Cherokee, completing the disassembly.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror on a Jeep Grand Cherokee
How to Replace the External Wing Mirror on a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To replace the external wing mirror on a Jeep Grand Cherokee, you need to detach the door panel by unscrewing the screws located at the handle and in…
How to disassemble the front door panel of the Jeep Grand Cherokee
How to disassemble the front door panel of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In a few simple steps, we will see the process of disassembling and replacing the front door panel of the Jeep Grand Cherokee. First, we open the fro…
Removing the Rear Door Panel of the Jeep Grand Cherokee
Removing the Rear Door Panel of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this guide, learn how to remove and replace the rear door panel of the Jeep Grand Cherokee by following these simple steps. First, open the rear d…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos