Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK, MK 3, WH - Years 2004-2010
Part: Side mirror

To replace the external wing mirror on a Jeep Grand Cherokee, you need to detach the door panel by unscrewing the screws located at the handle and inside the window switch panel. Once the panel is removed, disconnect the connector attached to the mirror and unscrew the corresponding screws that secure it from the inside. This will allow you to completely remove the mirror and replace it with a new spare part; after installation, reassemble all the removed components.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the external rearview mirror of the Jeep Grand Cherokee
Replacement of the external rearview mirror of the Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / MK 5, WL) Today's procedure will show us how to disassemble and replace the external rearview mirror of the Jeep Grand Cherokee. First, we open the front door …
How to replace and install the bulb of the external rearview mirror of the Jeep Grand Cherokee
How to replace and install the bulb of the external rearview mirror of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) The instructions in this guide will show us how to replace and install the turn signal bulb of the external rearview mirror of the Jeep Grand Cheroke…
How to Replace the Interior Rear-View Mirror in a Jeep Grand Cherokee
How to Replace the Interior Rear-View Mirror in a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this brief and simple guide, follow the steps to remove and replace the interior rear-view mirror in a Jeep Grand Cherokee. First, get inside the …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos