Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace and Install the Indicator Bulb in the External Mirror of a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Side marker bulb

See other generations:
Video tutorial

The instructions in this guide will show you how to replace and install the indicator bulb in the external mirror of a Jeep Grand Cherokee. First, move to the side and begin removing the glass from the external mirror; then unscrew the screws of the indicator light and disconnect the electrical connector of the bulb, as shown in the video.

At this point, remove and replace the bulb with the new one, reinstalling the indicator light on the external mirror, following the video tutorial to the end!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror on the Jeep Grand Cherokee
Replacing the External Wing Mirror on the Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / WL, MK 5) Today's procedure will show you how to remove and replace the external wing mirror on the Jeep Grand Cherokee. First, open the front door of the vehi…
How to Replace the External Wing Mirror on a Jeep Grand Cherokee?
How to Replace the External Wing Mirror on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this tutorial, you will learn how to replace the external wing mirror on a Jeep Grand Cherokee, a very simple and quick operation. First, open the…
How to Remove the External Mirror of a Jeep Grand Cherokee
How to Remove the External Mirror of a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) How to remove the external mirror of a Jeep Grand Cherokee? Use a plastic (rubber) lever to pry between the perimeter of the mirror frame and the mir…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos