Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Door trim panel

In this guide, learn how to remove and replace the rear door panel of the Jeep Grand Cherokee by following these simple steps. First, open the rear door and start by removing the various screws located on the panel; these can be found on the opening handle and the sides of the panel, as shown in the video. At this point, pry the sides of the panel to detach and remove it; then disconnect the electrical connector for the window switch and the handle cable. Now refit everything by applying the reverse procedure!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Tailgate Panel on the Jeep Grand Cherokee MK2
Remove the Tailgate Panel on the Jeep Grand Cherokee MK2
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Today, you will see how to remove the rear door panel and how to remove the tailgate lock actuator on the second series Jeep Grand Cherokee. First, o…
How to Remove the Rear Door Panel on a Jeep Grand Cherokee?
How to Remove the Rear Door Panel on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) Removing the rear door panel on a Jeep Grand Cherokee is an extremely simple and quick operation; let’s see how to proceed in this tutorial. First, u…
Replacing Speakers on Jeep Grand Cherokee
Replacing Speakers on Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) If the door speaker is damaged, it needs replacing. Here's how to remove it on a Jeep Grand Cherokee. Use a lever to remove the plastic trim at the c…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos