Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Door panel

Jeep Grand Cherokee - Door panel

Jeep Grand Cherokee (2004-2010 / WH, MK 3, WK)
How to remove the rear door panel in the Jeep Grand Cherokee?
Removing the rear door panel in the Jeep Grand Cherokee is an extremely simple and quick operation. Let's see how to proceed in this tutorial. First of all, …read all…
Posted on 20 September 2022 by ScegliAuto
Jeep Grand Cherokee (2004-2010 / WH, MK 3, WK)
Removing the front door panel of the Jeep Grand Cherokee WK
In this video we will see the step by step instructions to remove the front door panel of the Jeep Grand Cherokee fourth series, WK version. First of all we …read all…
Posted on 24 June 2022 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
Removal of the rear door panel of the Jeep Grand Cherokee
Let's see in this guide how to remove and replace the rear door panel of the Jeep Grand Cherokee, following these simple steps. First of all we open the rear …read all…
Posted on 18 April 2024 by ScegliAuto
Jeep Grand Cherokee (1998-2004 / WJ, MK 2)
Remove the tailgate panel on the Jeep Grand Cherokee MK2
Today we will see how to remove the rear door panel and how to remove the tailgate lock actuator on the second series Jeep Grand Cherokee. First of all, we …read all…
Posted on 5 March 2024 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
Removing the Jeep Grand Cherokee front door panel
Let's see in this video how to remove the front door panel of a 2020 Jeep Grand Cherokee, following these simple instructions. First of all we open the front …read all…
Posted on 31 December 2023 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
Removing the door panel on the Grand Cherokee
We disassemble the car cover panel if it needs to be changed or if we have to disassemble some pieces inside it. Let's see the disassembly. We open the car …read all…
Posted on 22 December 2023 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
How to remove the door panel of a Jeep Grand Cherokee
Let's see how to remove the left front door panel of a Jeep Grand Cherokee. We disconnect the battery terminals located in the engine compartment, with a …read all…
Posted on 28 November 2023 by ScegliAuto
Jeep Grand Cherokee (1998-2004 / WJ, MK 2)
Removing the front door panel
Remove the protective cap on the upper part of the panel, in correspondence with the external rearview mirror and unscrew the screw below; then unscrew the …read all…
Posted on 14 July 2023 by ScegliAuto
Shock absorbers (1) Air conditioning (1) Car stereo (10) Roof Rack Bars (1) Battery (19) Air Vents (1) Gearbox (3) Spark plugs (3) Bodywork (2) Glove box (1) Control unit (1) Key (16) Timing belt (2) V-belt (1) -board computer (2) Checks and maintenance (41) Bearing (1) Differential (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (3) Air filter (7) Cabin air filter (16) Diesel filter (5) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Headlight bulb (11) Rear light bulb (7) Interior lights ceiling light bulb (4) Dashboard light (1) License plate light (2) Third brake light (1) Handle (1) Engine (1) Window motor (3) Starter motor (2) Gear oil (1) Engine oil (5) Door panel (8) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (3) Gear Shift Knob (1) Pump (1) Fuel pump (3) Door (1) Instrument cluster (14) Radiator (1) Passenger compartment heating radiator (3) Wheel (1) Fuse box (14) Seat (1) Drive shaft (1) Crankshaft RPM sensor (1) Outside rearview mirror (7) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (3) Interior blower (1) Side window (1) Steering wheel (4)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos