Do it yourself
| ||||
|
Jeep Grand Cherokee - Windscreen wipers
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
How do you replace the wiper blades on the Jeep Grand Cherokee? In order to replace the wiper blades of the Jeep Grand Cherokee, you need to lift the arm of the blade, so that you can go and release the fixing pin that …read all… Posted on 12 December 2022 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
Replace the rear wiper on the Jeep Grand Cherokee Let's see in this guide the step by step instructions to remove and replace the rear wiper of the Jeep Grand Cherokee, in simple and quick steps. First, let's …read all… Posted on 11 May 2024 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
How to replace the front wipers on the Jeep Grand Cherokee In today's video tutorial we will see how to remove and replace the front wipers of the Jeep Grand Cherokee, but also the rear one. First, let's move to the …read all… Posted on 13 April 2024 by ScegliAuto Shock absorbers (1) Air conditioning (1) Car stereo (10) Roof Rack Bars (1) Battery (19) Air Vents (1) Gearbox (3) Spark plugs (3) Bodywork (2) Glove box (1) Control unit (1) Key (16) Timing belt (2) V-belt (1) -board computer (2) Checks and maintenance (41) Bearing (1) Differential (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (3) Air filter (7) Cabin air filter (16) Diesel filter (5) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Headlight bulb (11) Rear light bulb (6) Interior lights ceiling light bulb (4) Dashboard light (1) License plate light (2) Third brake light (1) Handle (1) Engine (1) Window motor (3) Starter motor (2) Gear oil (1) Engine oil (5) Door panel (8) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (3) Gear Shift Knob (1) Pump (1) Fuel pump (3) Door (1) Instrument cluster (14) Radiator (1) Passenger compartment heating radiator (3) Wheel (1) Fuse box (13) Seat (1) Drive shaft (1) Crankshaft RPM sensor (1) Outside rearview mirror (7) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (3) Interior blower (1) Side window (1) Steering wheel (4) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |