Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jeep
  4. :
  5. Grand Cherokee
  6. : Air conditioning

Jeep Grand Cherokee - Air conditioning

Jeep Grand Cherokee (1998-2004 / WJ, MK 2)
Internal radiator replacement instructions

In order to replace the passenger compartment heating radiator, it is necessary to have good knowledge of general mechanics and above all to arm yourself with …read all…
Posted on 29 August 2023 by ScegliAuto

Shock absorbers (1) Air conditioning (1) Car stereo (10) Roof Rack Bars (1) Battery (19) Air Vents (1) Gearbox (3) Spark plugs (3) Bodywork (2) Glove box (1) Control unit (1) Key (16) Timing belt (2) V-belt (1) -board computer (2) Checks and maintenance (41) Bearing (1) Differential (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (3) Air filter (7) Cabin air filter (16) Diesel filter (5) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Headlight bulb (11) Rear light bulb (7) Interior lights ceiling light bulb (4) Dashboard light (1) License plate light (2) Third brake light (1) Handle (1) Engine (1) Window motor (3) Starter motor (2) Gear oil (1) Engine oil (5) Door panel (8) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (3) Gear Shift Knob (1) Pump (1) Fuel pump (3) Door (1) Instrument cluster (14) Radiator (1) Passenger compartment heating radiator (3) Wheel (1) Fuse box (14) Seat (1) Drive shaft (1) Crankshaft RPM sensor (1) Outside rearview mirror (7) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (3) Interior blower (1) Side window (1) Steering wheel (4)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos