Do it yourself
Frequently asked questions about cars and motorcycles

Jeep Grand Cherokee - Radiator

Radiator Jeep Grand Cherokee (2004-2010 / wk, mk 3, wh)

Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH)
Radiator Replacement on Jeep Grand Cherokee

Open the bonnet. Remove the six clips and two covers that secure the top part of the front bumper. Disconnect the air intake that is clipped in place: just …Read all…
Posted on 2 May 2026 by ScegliAuto

Alternator (1) Shocks (1) Air conditioning (1) Car stereo (8) Roof rack bars (1) Battery (20) Air vents (1) Transmission (3) Spark plugs (3) Body (4) Glove compartment (2) Control unit (1) Key (26) Timing belt (2) V-belt (1) Onboard computer (3) Checks and maintenance (15) Dashboard (1) Bearing (1) Differential (1) Brake rotors (1) Headlight (7) Tail light (3) Fog lights (4) Air filter (8) Cabin air filter (16) Diesel fuel filter (5) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (2) Light bulb (5) Side marker bulb (1) Headlight bulb (13) Tail light bulb (8) Interior dome light bulb (5) Instrument panel light (1) License plate light (2) (1) Handle (1) Power window motor (3) Starter motor (2) Transmission fluid (1) Engine oil (1) Clock (2) Door trim panel (12) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Shift knob (1) Pump (1) Fuel pump (3) Car door (1) Instrument cluster (1) Radiator (1) Heater core (3) Wheel (1) Fuse box (22) Seat (2) Axle shaft (1) Crankshaft position sensor (2) Side mirror (8) Rearview mirror (1) Warning light – error code (13) (11) Tire pressure warning light (6) Service warning light (68) Engine mount (1) Fuel cap (3) Windshield wipers (3) Blower motor (1) Side window (1) Steering wheel (4)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos