Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Instrument panel light

Jeep Grand Cherokee - Instrument panel light

Instrument Panel Light Jeep Grand Cherokee (1998-2004 / mk 2, wj)

Jeep Grand Cherokee (1998-2004 / MK 2, WJ)
Replacing Instrument Cluster Bulbs
To replace the instrument cluster bulbs, it is necessary to remove it: start by removing the cover located under the instrument cluster, just behind the light …Read all…
Posted on 12 February 2026 by ScegliAuto
Alternator (1) Shocks (1) Air conditioning (1) Car stereo (9) Roof rack bars (1) Battery (20) Air vents (1) Transmission (3) Spark plugs (3) Body (4) Glove compartment (2) Control unit (1) Key (27) Timing belt (2) V-belt (1) Onboard computer (3) Checks and maintenance (15) Dashboard (1) Bearing (1) Differential (1) Brake rotors (1) Headlight (7) Tail light (3) Fog lights (5) Air filter (8) Cabin air filter (16) Diesel fuel filter (5) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (2) Light bulb (5) Side marker bulb (1) Headlight bulb (13) Tail light bulb (8) Interior dome light bulb (5) Instrument panel light (1) License plate light (2) (1) Handle (1) Power window motor (3) Starter motor (2) Transmission fluid (1) Engine oil (1) Clock (2) Door trim panel (12) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Shift knob (1) Pump (1) Fuel pump (3) Car door (1) Instrument cluster (1) Radiator (1) Heater core (3) Wheel (1) Fuse box (22) Seat (2) Axle shaft (1) Crankshaft position sensor (2) Side mirror (8) Rearview mirror (1) Warning light – error code (13) (2) Tire pressure warning light (17) Service warning light (68) Engine mount (1) Fuel cap (3) Windshield wipers (3) Blower motor (1) Side window (1) Steering wheel (4)

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos