Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Brake rotors

Jeep Grand Cherokee - Brake rotors

Brake Rotors Jeep Grand Cherokee (2004-2010 / wk, mk 3, wh)

Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH)
How to Replace the Rear Brake Discs and Pads on the Jeep Grand Cherokee
This guide explains how to replace the rear brake discs and pads on the Jeep Grand Cherokee, following these simple steps. First, lift the vehicle at the rear …Read all…
Posted on 5 August 2026 by ScegliAuto
Alternator (1) Shocks (1) Air conditioning (1) Car stereo (8) Roof rack bars (1) Battery (20) Air vents (1) Transmission (3) Spark plugs (3) Body (4) Glove compartment (2) Control unit (1) Key (26) Timing belt (2) V-belt (1) Onboard computer (3) Checks and maintenance (15) Dashboard (1) Bearing (1) Differential (1) Brake rotors (1) Headlight (7) Tail light (3) Fog lights (4) Air filter (8) Cabin air filter (16) Diesel fuel filter (5) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (2) Light bulb (5) Side marker bulb (1) Headlight bulb (13) Tail light bulb (8) Interior dome light bulb (5) Instrument panel light (1) License plate light (2) (1) Handle (1) Power window motor (3) Starter motor (2) Transmission fluid (1) Engine oil (1) Clock (2) Door trim panel (12) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Shift knob (1) Pump (1) Fuel pump (3) Car door (1) Instrument cluster (1) Radiator (1) Heater core (3) Wheel (1) Fuse box (22) Seat (2) Axle shaft (1) Crankshaft position sensor (2) Side mirror (8) Rearview mirror (1) Warning light – error code (13) (11) Tire pressure warning light (6) Service warning light (68) Engine mount (1) Fuel cap (3) Windshield wipers (3) Blower motor (1) Side window (1) Steering wheel (4)

How to Remove the Rear Bumper of the Peugeot 308?

To remove the rear bumper of the Peugeot 308, open the tailgate and then loosen the screws that secure the two rear light clusters from the inside. Once these two lights have been removed, you can proceed to pull the lights from their housing and disconnect their connectors. At this point, loosen the screws that secure the bumper from its underside, from inside the wheel arches, and from inside the light housings. When all screws have been loosened, you can detach the old bumper and replace it with a new one.

Watch the video!


by ScegliAuto

More videos