Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jeep
  4. :
  5. Grand Cherokee
  6. : Tail light

Jeep Grand Cherokee - Tail light

Tail Light Jeep Grand Cherokee (2010-2021 / wk 2, mk 4)

Jeep Grand Cherokee (2010-2021 / WK2, MK 4)
Replacing the Third Brake Light Bulb on a Jeep Grand Cherokee

Today, in this video tutorial, you will learn how to remove and replace the third brake light and its bulbs on a Jeep Grand Cherokee. First, open the rear …Read all…
Posted on 4 September 2026 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / WK2, MK 4)
How to Remove the Rear Lights on a Jeep Grand Cherokee?

In this tutorial, you will see how to remove the rear lights on a Jeep Grand Cherokee. This operation is very simple and quick, necessary if you need to …Read all…
Posted on 26 August 2026 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / WK2, MK 4)
How to Remove the Rear Light from a Jeep Grand Cherokee

How do you remove the rear light from the Grand Cherokee? Open the tailgate and remove the rear light. Lift the boot lid of the luggage compartment, unscrew …Read all…
Posted on 25 April 2026 by ScegliAuto

Alternator (1) Shocks (1) Air conditioning (1) Car stereo (8) Roof rack bars (1) Battery (20) Air vents (1) Transmission (3) Spark plugs (3) Body (4) Glove compartment (2) Control unit (1) Key (26) Timing belt (2) V-belt (1) Onboard computer (3) Checks and maintenance (15) Dashboard (1) Bearing (1) Differential (1) Brake rotors (1) Headlight (7) Tail light (3) Fog lights (4) Air filter (8) Cabin air filter (16) Diesel fuel filter (5) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (2) Light bulb (5) Side marker bulb (1) Headlight bulb (13) Tail light bulb (8) Interior dome light bulb (5) Instrument panel light (1) License plate light (2) (1) Handle (1) Power window motor (3) Starter motor (2) Transmission fluid (1) Engine oil (1) Clock (2) Door trim panel (12) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Shift knob (1) Pump (1) Fuel pump (3) Car door (1) Instrument cluster (1) Radiator (1) Heater core (3) Wheel (1) Fuse box (22) Seat (2) Axle shaft (1) Crankshaft position sensor (2) Side mirror (8) Rearview mirror (1) Warning light – error code (13) (11) Tire pressure warning light (6) Service warning light (68) Engine mount (1) Fuel cap (3) Windshield wipers (3) Blower motor (1) Side window (1) Steering wheel (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos