Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Front bumper

Jeep Grand Cherokee - Front bumper

Front Bumper Jeep Grand Cherokee (2010-2021 / wk 2, mk 4)

Jeep Grand Cherokee (2010-2021 / WK2, MK 4)
How to Remove the Front Bumper of the Jeep Grand Cherokee
Through these brief and simple instructions, discover how to dismantle and replace the front bumper of the Jeep Grand Cherokee. First, open the vehicle's …Read all…
Posted on 21 August 2026 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / WK2, MK 4)
How to Remove the Front Bumper of the Jeep Grand Cherokee?
To remove the front bumper of the Jeep Grand Cherokee, loosen the screws and remove the fastening rivets that secure the bumper at its lower part. Once these …Read all…
Posted on 24 August 2026 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / WK2, MK 4)
Removing the Front Bumper from the Jeep Grand Cherokee MK4
Let’s discover in this guide how to remove the front bumper on the Jeep Grand Cherokee fourth generation, following the instructions below. First, open the …Read all…
Posted on 28 July 2026 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / WK2, MK 4)
Removing the Front Bumper on a Jeep Compass
First, remove the front wheels and unscrew the clips from the wheel arches to remove them. Next, move to the bottom of the bumper and unscrew all the fixing …Read all…
Posted on 2 June 2026 by ScegliAuto
Alternator (1) Shocks (1) Air conditioning (1) Car stereo (8) Roof rack bars (1) Battery (20) Air vents (1) Transmission (3) Spark plugs (3) Body (4) Glove compartment (2) Control unit (1) Key (26) Timing belt (2) V-belt (1) Onboard computer (3) Checks and maintenance (15) Dashboard (1) Bearing (1) Differential (1) Brake rotors (1) Headlight (7) Tail light (3) Fog lights (4) Air filter (8) Cabin air filter (16) Diesel fuel filter (5) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (2) Light bulb (5) Side marker bulb (1) Headlight bulb (13) Tail light bulb (8) Interior dome light bulb (5) Instrument panel light (1) License plate light (2) (1) Handle (1) Power window motor (3) Starter motor (2) Transmission fluid (1) Engine oil (1) Clock (2) Door trim panel (12) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Shift knob (1) Pump (1) Fuel pump (3) Car door (1) Instrument cluster (1) Radiator (1) Heater core (3) Wheel (1) Fuse box (22) Seat (2) Axle shaft (1) Crankshaft position sensor (2) Side mirror (8) Rearview mirror (1) Warning light – error code (13) (11) Tire pressure warning light (6) Service warning light (68) Engine mount (1) Fuel cap (3) Windshield wipers (3) Blower motor (1) Side window (1) Steering wheel (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos