Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Front bumper

See other generations:
Video tutorial

Through these brief and simple instructions, discover how to dismantle and replace the front bumper of the Jeep Grand Cherokee. First, open the vehicle's bonnet and start unscrewing and removing all the screws and clips found on both sides of the front wheel arches; remove the screws located above the bumper and dismantle the lower plastic shield, as shown in the video.

At this point, gently unclip the bumper from the sides until it is completely removed; finally, reattach the bumper by securing it at all points!


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Jeep Grand Cherokee?
How to Remove the Front Bumper of the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To remove the front bumper of the Jeep Grand Cherokee, loosen the screws and remove the fastening rivets that secure the bumper at its lower part. On…
How to disassemble the front headlight on the Jeep Grand Cherokee
How to disassemble the front headlight on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) These short and simple steps will show us how to disassemble and replace the front headlight of the Jeep Grand Cherokee. First, we open the hood and …
Removing the Front Bumper from the Jeep Grand Cherokee MK4
Removing the Front Bumper from the Jeep Grand Cherokee MK4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Let’s discover in this guide how to remove the front bumper on the Jeep Grand Cherokee fourth generation, following the instructions below. First, op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos