Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Tyre on the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Wheel

See other generations:
Video tutorial

To change the tyre on the Jeep Grand Cherokee, start by putting the suspension in tyre change mode and engaging the handbrake. Go to the rear of the vehicle, lift the boot panel, take the tools to change the tyre, and remove the wheel by unscrewing the cap. Approach the wheel to be changed, loosen the bolts, insert the jack into the designated space, and lift the car until the wheel is off the ground.

At this point, you can fully unscrew the bolts and remove the wheel. Take the spare wheel, screw the bolts in the manner indicated in the video, lower the car, and tighten the bolts following the same method shown in the video.

Finally, return the suspension to normal mode.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Remove the External Mirror of a Jeep Grand Cherokee
How to Remove the External Mirror of a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) How to remove the external mirror of a Jeep Grand Cherokee? Use a plastic (rubber) lever to pry between the perimeter of the mirror frame and the mir…
How to change the battery in the Jeep Grand Cherokee remote control
How to change the battery in the Jeep Grand Cherokee remote control
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) On the Jeep Grand Cherokee, when the remote control starts to lose range or indicates a low battery, you can replace the battery in a few minutes. Wo…
…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos