Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper from the Jeep Grand Cherokee MK4

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Front bumper

Let’s discover in this guide how to remove the front bumper on the Jeep Grand Cherokee fourth generation, following the instructions below. First, open the bonnet and start by removing the upper plastic clips of the bumper; then remove the clips found on both sides of the wheel arches, as shown in the video. At this point, gently pry at the sides to detach and remove the bumper after releasing the wheel arch covers; all that’s left is to reassemble everything by applying the reverse procedure!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of the Jeep Grand Cherokee?
How to Remove the Front Bumper of the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To remove the front bumper of the Jeep Grand Cherokee, loosen the screws and remove the fastening rivets that secure the bumper at its lower part. On…
How to Remove the Front Bumper of the Jeep Grand Cherokee
How to Remove the Front Bumper of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Through these brief and simple instructions, discover how to dismantle and replace the front bumper of the Jeep Grand Cherokee. First, open the vehic…
How to disassemble the front headlight on the Jeep Grand Cherokee
How to disassemble the front headlight on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) These short and simple steps will show us how to disassemble and replace the front headlight of the Jeep Grand Cherokee. First, we open the hood and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos