Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on a Jeep Compass

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Front bumper

First, remove the front wheels and unscrew the clips from the wheel arches to remove them. Next, move to the bottom of the bumper and unscrew all the fixing bolts. Similarly, unscrew the bolts and clips located at the top of the bumper, near the bonnet. Now, working carefully, pull the bumper off by hand, taking care not to damage the mounts. Generally, the removal of the bumper follows the same procedure across most car models, as it is always secured from above and below, and often in the wheel arches.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper on a Grand Cherokee
Removing the Rear Bumper on a Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Let's look at removing the rear bumper from a Jeep Grand Cherokee. Lift the tailgate to access the screws and rivets securing the rear bumper. Unscre…
Removing the Rear Bumper on a Jeep Grand Cherokee
Removing the Rear Bumper on a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) How do you remove the rear bumper? Remove the rear bumper from the Jeep Grand Cherokee if it is damaged or if you want to take off other parts undern…
Removing the Front Bumper from the Jeep Grand Cherokee MK4
Removing the Front Bumper from the Jeep Grand Cherokee MK4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Let’s discover in this guide how to remove the front bumper on the Jeep Grand Cherokee fourth generation, following the instructions below. First, op…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos