Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on a Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Rear bumper

See other generations:
Video tutorial

Let's look at removing the rear bumper from a Jeep Grand Cherokee. Lift the tailgate to access the screws and rivets securing the rear bumper.

Unscrew the securing screws located at the top of the bumper: there are plastic rivets that need to be removed. Remove the screws (rivets) located at the sides of the car's wheel arch liners, then use a lever to detach the securing clips located at the bottom of the bumper (between the black plastic trim and the bumper).

Once the bumper is free from any screws or pins, you can detach it from the bodywork. Fit a new bumper.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper on a Jeep Grand Cherokee
Removing the Rear Bumper on a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) How do you remove the rear bumper? Remove the rear bumper from the Jeep Grand Cherokee if it is damaged or if you want to take off other parts undern…
Removing the Front Bumper from the Jeep Grand Cherokee MK4
Removing the Front Bumper from the Jeep Grand Cherokee MK4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Let’s discover in this guide how to remove the front bumper on the Jeep Grand Cherokee fourth generation, following the instructions below. First, op…
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
How to replace the rear headlamp bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1992-1998 / ZJ, MK 1, ZG) To replace the rear headlamp bulb on a Jeep Grand Cherokee, open the boot lid so that the screws securing the rear headlamp can be loosened. Once the…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos