Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Fog lights

Jeep Grand Cherokee - Fog lights

Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
How to replace and modify fog light bulbs on Jeep Grand Cherokee
To replace the fog light bulb on the Jeep Grand Cherokee we need to turn the wheel in order to have more maneuvering space, remove the 2 clips that hold the …read all…
Posted on 25 November 2022 by ScegliAuto
Jeep Grand Cherokee (1992-1998 / MK 1, ZG, ZJ)
How to replace fog lights on Jeep Grand Cherokee MK1
Today we will see how to remove and replace the bulbs and front fog lights of the first series Jeep Grand Cherokee. First of all, we open the bonnet and start …read all…
Posted on 23 November 2022 by ScegliAuto
Jeep Grand Cherokee (1998-2004 / WJ, MK 2)
Removing the fog lights for cleaning
If dirt or impurities get inside the headlight, it can be disassembled for cleaning. If the glass of the headlight becomes opaque and there are dirt …read all…
Posted on 14 July 2023 by ScegliAuto
Shock absorbers (1) Air conditioning (1) Car stereo (10) Roof Rack Bars (1) Battery (19) Air Vents (1) Gearbox (3) Spark plugs (3) Bodywork (2) Glove box (1) Control unit (1) Key (16) Timing belt (2) V-belt (1) -board computer (2) Checks and maintenance (41) Bearing (1) Differential (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (3) Air filter (7) Cabin air filter (16) Diesel filter (5) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Headlight bulb (11) Rear light bulb (6) Interior lights ceiling light bulb (4) Dashboard light (1) License plate light (2) Third brake light (1) Handle (1) Engine (1) Window motor (3) Starter motor (2) Gear oil (1) Engine oil (5) Door panel (8) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (3) Gear Shift Knob (1) Pump (1) Fuel pump (3) Door (1) Instrument cluster (14) Radiator (1) Passenger compartment heating radiator (3) Wheel (1) Fuse box (13) Seat (1) Drive shaft (1) Crankshaft RPM sensor (1) Outside rearview mirror (7) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (3) Interior blower (1) Side window (1) Steering wheel (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos