Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Fog Light for Cleaning

Model: Jeep Grand Cherokee MK 2, WJ - Years 1998-2004
Part: Fog lights

If dirt or impurities have entered the fog light, it is possible to dismantle it for cleaning. If the glass of the light becomes cloudy and dirt infiltrates inside, complete removal of the light unit is necessary for thorough cleaning. Remove the rear retaining screws of the light using a spanner. Gently remove the light, taking care with the cables, which must be disconnected from the connector. Once the cover is removed, take out the complete light block. Dismantle the front glass and, using a drill fitted with a cloth or sponge wheel, proceed with complete cleaning. Refit the light and check the operation of the lamps and the correct alignment of the light.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Fog Light Bulb on Jeep Grand Cherokee
How to Replace Fog Light Bulb on Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) Want to change the bulbs of the front fog lights? Learn how to remove the bulbs from the front fog lights of the Jeep Grand Cherokee. Access the fog …
How to Replace the Fog Lights on the Jeep Grand Cherokee MK1
How to Replace the Fog Lights on the Jeep Grand Cherokee MK1
Jeep Grand Cherokee (1992-1998 / ZG, MK 1, ZJ) Today, you will see how to remove and replace the bulbs and front fog lights of the first series Jeep Grand Cherokee. First, open the bonnet and star…
How to replace and modify the fog light bulbs on a Jeep Grand Cherokee
How to replace and modify the fog light bulbs on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the fog light bulb on a Jeep Grand Cherokee, turn the wheel to gain more working space, remove the 2 clips holding the splash shield with …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos