Do it yourself
| ||||
|
Jeep Grand Cherokee - Steering wheel
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
Guide to disassembling the steering wheel of the Jeep Grand Cherokee In this short guide, we will see the main instructions on how to disassemble and replace the steering wheel and its airbag of the Jeep Grand Cherokee. First of …read all… Posted on 10 May 2024 by ScegliAuto
Jeep Grand Cherokee (2004-2010 / WH, MK 3, WK)
How to dismantle the steering wheel and airbag of the Jeep Grand Cherokee. Today's tutorial guide will show us the steps that will allow us to disassemble and replace the steering wheel and its airbag of the Jeep Grand Cherokee. …read all… Posted on 22 December 2023 by ScegliAuto
Jeep Grand Cherokee (2010-2021 / MK 4, WK2)
How to remove the steering wheel of the Jeep Grand Cherokee Mk4 The guide shows how to remove the steering wheel of the Jeep Grand Cherokee Mk4. The first operation to carry out is to disconnect the battery negative, …read all… Posted on 16 September 2022 by ScegliAuto
Jeep Grand Cherokee (2004-2010 / WH, MK 3, WK)
Steering disassembly of the Grand Cherokee We see the disassembly of the steering wheel on a Grand Cherokee with attached parts. We disconnect the cover plastics around the steering wheel (rear). Once …read all… Posted on 10 January 2024 by ScegliAuto Shock absorbers (1) Air conditioning (1) Car stereo (10) Roof Rack Bars (1) Battery (19) Air Vents (1) Gearbox (3) Spark plugs (3) Bodywork (2) Glove box (1) Control unit (1) Key (16) Timing belt (2) V-belt (1) -board computer (2) Checks and maintenance (41) Bearing (1) Differential (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (3) Air filter (7) Cabin air filter (16) Diesel filter (5) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (2) Light bulb (5) Headlight bulb (11) Rear light bulb (6) Interior lights ceiling light bulb (4) Dashboard light (1) License plate light (2) Third brake light (1) Handle (1) Engine (1) Window motor (3) Starter motor (2) Gear oil (1) Engine oil (5) Door panel (8) Windshield (1) Front bumper (4) Rear bumper (2) Brake pads (4) Hydraulic pistons (3) Gear Shift Knob (1) Pump (1) Fuel pump (3) Door (1) Instrument cluster (14) Radiator (1) Passenger compartment heating radiator (3) Wheel (1) Fuse box (13) Seat (1) Drive shaft (1) Crankshaft RPM sensor (1) Outside rearview mirror (7) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (3) Interior blower (1) Side window (1) Steering wheel (4) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |