Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel and Airbag from a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK, MK 3, WH - Years 2004-2010
Part: Steering wheel

This tutorial will show you the steps to remove and replace the steering wheel and its airbag on a Jeep Grand Cherokee. First, get inside the vehicle and start by releasing the two tabs of the airbag located on the back of the steering wheel; disconnect the electrical connector to remove it, as shown in the video. Next, use a socket wrench with an extension to unscrew the central screw of the steering wheel, removing it and replacing it with the new one; then centre it and reconnect the various electrical connections for the steering wheel controls, finally reassembling the airbag!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the steering wheel of the Jeep Grand Cherokee
Guide to disassembling the steering wheel of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this short guide, we will see the main instructions on how to disassemble and replace the steering wheel and its airbag of the Jeep Grand Cherokee…
Steering Wheel Removal on the Grand Cherokee
Steering Wheel Removal on the Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) Remove the covering plastics around the steering wheel (rear). Once removed, unscrew the securing screws and take out the airbag. Detach the airbag f…
How to Remove the Steering Wheel from a Jeep Grand Cherokee Mk4
How to Remove the Steering Wheel from a Jeep Grand Cherokee Mk4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) This guide explains how to remove the steering wheel from a Jeep Grand Cherokee Mk4. The first step is to disconnect the negative terminal of the bat…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos