Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the steering wheel of the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Steering wheel

In this short guide, we will see the main instructions on how to disassemble and replace the steering wheel and its airbag of the Jeep Grand Cherokee. First of all, we get on board the vehicle and start disassembling and removing the steering wheel airbag, releasing it through the side holes; then we disconnect its electrical connector, as shown in the video. At this point, we unscrew the central screw of the steering wheel to remove it, replacing it if necessary with a new one; then we position it perfectly straight and finally reassemble the airbag, making all the various electrical connections.

Posted on 10 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located in the Jeep Grand Cherokee?
Where is the OBD port located in the Jeep Grand Cherokee?
Jeep Grand Cherokee (2021-2026 / MK 5, WL) If you want to discover where the OBD port of your new Jeep Grand Cherokee is located, all you have to do is follow the steps described in our new gu…
How to Remove the Steering Wheel and Airbag from a Jeep Grand Cherokee
How to Remove the Steering Wheel and Airbag from a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) This tutorial will show you the steps to remove and replace the steering wheel and its airbag on a Jeep Grand Cherokee. First, get inside the vehicle…
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) To independently locate the fuse box in your 2004 Jeep Grand Cherokee, carefully read the following guide where we will assist you step by step. Firs…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos