Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to remove the steering wheel of the Jeep Grand Cherokee Mk4

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Part: Steering wheel
Operation: How to remove the steering wheel of the Jeep Grand Cherokee Mk4

The guide shows how to remove the steering wheel of the Jeep Grand Cherokee Mk4. The first operation to carry out is to disconnect the battery negative, located under the front passenger seat. The procedure can be started from the driver's seat by removing the airbag unit; for this operation it is necessary to insert a small screwdriver into the rear part of the steering wheel and disengage the blocks of the unit. Disconnect the electrical control cables and unscrew the 10mm hex bolt and remove the weight block. Disconnect the electrical connectors highlighted and remove the steering wheel. Carry out the necessary operations and refit the steering wheel in position by following the steps in reverse.


Posted on 16 September 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - What are the problems with the Jeep Grand Cherokee Mk3 power steering? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos