Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster. Then, within the first ten seconds after the instrument cluster lights up, press the accelerator pedal fully three times. Once you have pressed the accelerator pedal three times, turn off the instrument cluster. After completing this step, you will have successfully reset the oil light on your Jeep Grand Cherokee.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2021 Jeep Grand Cherokee
How to Reset the Oil Light on a 2021 Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / MK 5, WL) To manually reset the oil light on your 2021 Jeep Grand Cherokee, follow the steps outlined in this guide. Start by entering the cabin, then insert t…
How to Reset the Engine Oil Light on the Jeep Grand Cherokee MK4
How to Reset the Engine Oil Light on the Jeep Grand Cherokee MK4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this short video, you will learn how to reset the service or engine oil light on the fourth series Jeep Grand Cherokee, following the instructions…
How to Reset the Tyre Pressure Light on a Jeep Grand Cherokee?
How to Reset the Tyre Pressure Light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) To reset the tyre pressure light on a Jeep Grand Cherokee, first inflate the tyres to the pressure value indicated on the sticker attached to the dri…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos