Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2016 Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

If the oil light on the instrument panel of your 2016 Jeep Grand Cherokee appears even though the oil has recently been changed, don't worry because you can easily reset the light through the following procedure. First, get in the car and reach the driver's seat, then turn on the ignition by pressing the start button twice consecutively and locate the screen showing the remaining oil life. At this point, as indicated on the display, hold down the "OK" button until the reset is complete, and once the operation is finished, turn off the ignition.

Posted on 12 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the engine oil light on the Jeep Grand Cherokee
How to reset the engine oil light on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If you want to manually reset the engine oil light on the display of the instrument panel of your Jeep Grand Cherokee, then you must pay attention to…
How to Reset the Oil Light on a 2024 Jeep Grand Cherokee
How to Reset the Oil Light on a 2024 Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / MK 5, WL) To manually reset the engine oil light on your new 2024 Jeep Grand Cherokee, follow all the steps outlined in this guide. First, get in the car and t…
How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos