Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Battery on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 3, WK, WH - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Key

See other generations:
Video tutorial

In this very brief guide today, we will go through the step-by-step procedure to replace the battery (CR2032) in the key of a Jeep Grand Cherokee, model produced from 2008 to 2013. First, extract the physical emergency key by pulling the designated release lever as shown in the video, then lever off the back cover of the remote to remove it, allowing access to the battery compartment.

Once done, you can remove the old battery and replace it with a new one, ensuring the positive side is facing down, and finally close everything up.


Posted on 30 September 2026 by ScegliAuto


Related tutorials

Jeep Grand Cherokee (1998-2004 / WJ, MK 2) Is the remote battery of your Jeep Grand Cherokee flat? Here’s how to open it to replace the battery. Take the Grand Cherokee remote and, using a scr…
Jeep Grand Cherokee (2004-2010 / MK 3, WK, WH) In this video tutorial, you will learn how to replace the battery in the remote for the Jeep Grand Cherokee. The operation is very simple: first, rem…
Jeep Grand Cherokee (2010-2021 / MK 4, WK2) In this tutorial video, you will see how to disassemble and replace the battery of the remote key for a Jeep Grand Cherokee. Take your remote in hand…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos