Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to open the remote control of the Jeep Grand Cherokee

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WJ, MK 2 - Years 1998-2004
Part: Key
Operation: How to open the remote control of the Jeep Grand Cherokee

Dead battery in the remote control of a Jeep Grand Cherokee? Let's see how it opens to replace the battery. We take the remote control of the Grand Cherokee and with the help of a screwdriver we pry between the two parts of the plastic key cover. We pry up to separate the two parts of the remote control (without breaking them). We take out the worn battery, let's take a new one of the same size and voltage. Let's join the two parts of the cover of our remote control by pressing on them until you hear the lock click. We check the exact operation of the Grand Cherokee's remote key by pressing the buttons.


Posted on 9 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - How much does it cost to duplicate the key of the Jeep Gran Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - How many batteries does the Jeep Grand Cherokee remote control have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos