Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Remote Key Battery for a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Key

In this tutorial video, you will see how to disassemble and replace the battery of the remote key for a Jeep Grand Cherokee. Take your remote in hand and start by removing the key from the remote: use a sharp object like a screwdriver to insert it into the slot and lever it open, splitting the remote into two parts. At this point, access the circuit board and the battery; remove the old battery and replace it with a new one of the correct type (in this case, a 2032). Insert it the right way round and reassemble the remote!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Grand Cherokee (2010-2021 / WK2, MK 4) As seen in this tutorial, replacing the remote battery of the Jeep Grand Cherokee is an extremely simple and quick operation. You will only need a sm…
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) In this video tutorial, you will learn how to replace the battery in the remote for the Jeep Grand Cherokee. The operation is very simple: first, rem…
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this tutorial, you will see how to replace the remote battery in a Jeep Grand Cherokee, a very simple and quick operation. For this, you will need…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos