Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Instrument Cluster Bulbs

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Instrument panel light

See other generations:
Video tutorial

To replace the instrument cluster bulbs, it is necessary to remove it: start by removing the cover located under the instrument cluster, just behind the light switch controls; then unscrew the fastening screws of the instrument cluster and pull it forward, disconnecting the power connector.

Once the dial is on the bench, extract the old bulbs (bayonet fitting) and insert the new ones: since it is necessary to dismantle the entire dial and to avoid some points being brighter than others, it is recommended to replace all the bulbs.

Proceed in reverse for reassembly.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Installing LED Cabin Lights
Installing LED Cabin Lights
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Replacing the original cabin bulbs with LED types will make the interior look much more pleasant and at the same time modern and appealing; the opera…
Replacement of the Front Light Bulb on a Jeep Grand Cherokee
Replacement of the Front Light Bulb on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Here are the useful instructions for removing and replacing the front light bulbs on the Jeep Grand Cherokee. First, open the vehicle's bonnet and st…
Replacing the Rear Headlight Bulb and Removing the Light Unit
Replacing the Rear Headlight Bulb and Removing the Light Unit
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) To replace the rear light bulb, it is necessary to remove the entire light unit. The screws are accessible on the side of the pillar. After removing …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos