Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Radiator replacement on Jeep Grand Cherokee

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee WH, WK, MK 3 - Years 2004-2010
Part: Radiator
Operation: Radiator replacement on Jeep Grand Cherokee

Open the hood. Remove the six retainers and the two caps securing the top of the front bumper. Detach the air intake which is inserted by interlocking: then you just need to move it a little and pull it to get it out of its seat. These two operations will serve to create the necessary work space: another thing you will have to do to do this is to remove the rivet that secures the fluid reservoir of the windshield wipers. Now that you have created the necessary space, unscrew the four bolts that secure the corners of the radiator, using a socket wrench. Unhook the pipes connected to it and remove it. Proceed backwards for assembly.


Posted on 1 January 2024 by ScegliAuto



Where is the fuse box located in the 2004 Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To find the fuse box inside your 2004 Jeep Grand Cherokee on your own, simply read the following guide carefully where we will help you step by step.
Replacing the heating radiator on Jeep Grand Cheroche
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Replacing the cooling radiator on Jeep Grand Cherokee, let's see how it is disassembled. We open the bonnet, with a suitable socket wrench we go to r
How to open the remote control of the Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Dead battery in the remote control of a Jeep Grand Cherokee? Let's see how it opens to replace the battery. We take the remote control of the Grand C

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos