Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Heating Radiator on Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Spark plugs

See other generations:
Video tutorial

Let’s see how to remove the cooling radiator on a Jeep Grand Cherokee. Open the bonnet, and using a suitable socket wrench, remove the screws securing the cooling fan. Lift the vehicle on a column lift and loosen the clamp on the water hose.

Use pliers to disconnect the various hoses of the cooling system (unscrew the lock that secures the front bonnet if it obstructs removal). Extract the fan assembly and then the radiator from the engine compartment.

Prepare to fit the new part in the engine bay, install the cooling fans, clamps, pins, and various pipes. Refill with coolant.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

What is the radio code for a Jeep Grand Cherokee and how to enter it?
What is the radio code for a Jeep Grand Cherokee and how to enter it?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitt…
How to Replace the Heating Radiator
How to Replace the Heating Radiator
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) The heating system in a car operates through a device similar to a small radiator that blows warm air to heat the interior of the vehicle. It is advi…
Where to Find the OBD Port on a Jeep Grand Cherokee
Where to Find the OBD Port on a Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / WL, MK 5) To find the OBD port on your new Jeep Grand Cherokee, follow these steps. First, enter the cabin from the driver's side, ensuring that your Jeep Gran…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos