Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front wipers on the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Windshield wipers

In today's video tutorial, you will see how to remove and replace the front wipers on the Jeep Grand Cherokee, as well as the rear one. First, move to the front of the vehicle and start by lifting the wiper arms; then release the clip of your wiper by rotating it to remove it completely, as shown in the video. At this point, install the new wiper blade; attach it securely to the arm and perform the same replacement operation for the other front blade!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen Wipers on a Jeep Grand Cherokee?
How to Replace the Windscreen Wipers on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the windscreen wipers on a Jeep Grand Cherokee, lift the wiper arm so that you can detach the fixing pin that connects the arm to the wipe…
Replace the Rear Wiper Blade on the Jeep Grand Cherokee
Replace the Rear Wiper Blade on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Follow this step-by-step guide to remove and replace the rear wiper blade on the Jeep Grand Cherokee in simple and quick steps. First, move to the re…
Replacing the Cabin Air Filter of the Jeep Grand Cherokee
Replacing the Cabin Air Filter of the Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) Follow this guide for instructions on how to remove and replace the cabin air filter of the Jeep Grand Cherokee. First, open the bonnet of the vehicl…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos