Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to replace the battery of a Jeep Cherokee and Jeep Grand Cherokee remote control

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Part: Key
Operation: How to replace the battery of a Jeep Cherokee and Jeep Grand Cherokee remote control

To replace the key battery of a Jeep Cherokee and Jeep Grand Cherokee car, you must first obtain a new battery compatible with the model. Take the key and remove the emergency blade by pressing and holding the button located on the back of the remote control. With the help of a thin but very sturdy tool, open the remote control by levering the slot visible from the outside. Proceed to extract the board containing the circuits and the battery, after which it will be sufficient to take out the battery to replace it with the new one. Put the card back into the remote control and close it again by pressing lightly until you hear a click.


Posted on 9 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - How much does it cost to duplicate the key of the Jeep Gran Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - How many batteries does the Jeep Grand Cherokee remote control have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos