Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Wiper Blade on the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Windshield wipers

Follow this step-by-step guide to remove and replace the rear wiper blade on the Jeep Grand Cherokee in simple and quick steps. First, move to the rear of your vehicle and start by removing the plastic clip at the base of the wiper blade; then lift the arm upwards and rotate it to detach and remove it from the rear wiper arm, as shown in the video. At this point, replace the wiper blade with the new one by applying the reverse procedure of removal!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Wiper Motor on the Jeep Grand Cherokee 1
Replacing the Rear Wiper Motor on the Jeep Grand Cherokee 1
Jeep Grand Cherokee (1992-1998 / ZG, MK 1, ZJ) In this guide, follow the procedure to remove and replace the rear wiper motor on the first series Jeep Grand Cherokee. First, open the boot and star…
How to replace the front wipers on the Jeep Grand Cherokee
How to replace the front wipers on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In today's video tutorial, you will see how to remove and replace the front wipers on the Jeep Grand Cherokee, as well as the rear one. First, move t…
How to Replace the Windscreen Wipers on a Jeep Grand Cherokee?
How to Replace the Windscreen Wipers on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the windscreen wipers on a Jeep Grand Cherokee, lift the wiper arm so that you can detach the fixing pin that connects the arm to the wipe…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos