Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wiper Motor on the Jeep Grand Cherokee 1

Model: Jeep Grand Cherokee ZG, MK 1, ZJ - Years 1992-1998

In this guide, follow the procedure to remove and replace the rear wiper motor on the first series Jeep Grand Cherokee. First, open the boot and start by removing the plastic interior trim; to do this, unscrew all the side screws as shown in the video. Next, remove the wiper along with its arm by unscrewing the nut at the base; now, use a star socket to remove the screw from the wiper motor. Then, unscrew the internal screws and disconnect the electrical connector to replace it!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Rear Wiper Blade on the Jeep Grand Cherokee
Replace the Rear Wiper Blade on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Follow this step-by-step guide to remove and replace the rear wiper blade on the Jeep Grand Cherokee in simple and quick steps. First, move to the re…
Where are the Fuses on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) The fuses on the Jeep Grand Cherokee are located within specific fuse boxes installed in the vehicle: this car model has two. The first is located in…
How to replace the front wipers on the Jeep Grand Cherokee
How to replace the front wipers on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In today's video tutorial, you will see how to remove and replace the front wipers on the Jeep Grand Cherokee, as well as the rear one. First, move t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos