Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Door Panel on Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

In this video, we will see how to remove the front door panel of a 2020 Jeep Grand Cherokee, following these simple instructions. First, open the front door and remove the plastic covers found in the grab handle and the opening handle; then unscrew the screws located underneath.

At this point, start prying on the sides of the panel to disengage it from the rear clips, and remove it as shown in the video; all that remains is to disconnect the handle cable and the electrical connector of the switch panel.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Jeep Grand Cherokee WK
Removing the Front Door Panel of the Jeep Grand Cherokee WK
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) This video provides step-by-step instructions for removing the front door panel of the fourth series Jeep Grand Cherokee, WK version. First, open the…
Removing the Rear Door Panel of the Jeep Grand Cherokee
Removing the Rear Door Panel of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this guide, learn how to remove and replace the rear door panel of the Jeep Grand Cherokee by following these simple steps. First, open the rear d…
How to Remove the Door Panel of a Jeep Grand Cherokee
How to Remove the Door Panel of a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Let's see how to remove the left front door panel of a Jeep Grand Cherokee. Disconnect the battery terminals located in the engine compartment, and u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos