Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Door trim panel

Let's see how to remove the left front door panel of a Jeep Grand Cherokee. Disconnect the battery terminals located in the engine compartment, and using a screwdriver, unscrew the screws located in the area of the upper door opening lever. Remove the switch panel from inside the door panel. Unscrew the remaining screws on the door panel and detach the retaining clips using a lever. Pull the panel away with your hands and detach it from the door (disconnect the power wiring and the opening cable). Reassemble everything by reversing the steps.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Window Switch Panel on a Jeep Grand Cherokee
How to Remove the Window Switch Panel on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before you begin, open the driver's door of your Jeep Grand Cherokee. Using a thin but sturdy tool as a lever, start by unclipping the window switch …
How to Remove the Rear Door Panel on a Jeep Grand Cherokee?
How to Remove the Rear Door Panel on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) Removing the rear door panel on a Jeep Grand Cherokee is an extremely simple and quick operation; let’s see how to proceed in this tutorial. First, u…
How to disassemble the front door panel of the Jeep Grand Cherokee
How to disassemble the front door panel of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In a few simple steps, we will see the process of disassembling and replacing the front door panel of the Jeep Grand Cherokee. First, we open the fro…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos