Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Door trim panel

Remove the cover panel of the vehicle if it needs replacing or if you need to access any components inside. Open the car door, remove the plastic cover inside the space of the internal lever. Unscrew the screws located in the upper lever space of the door opening. Unscrew the other screws on the door panel and detach the securing clips. Pull the panel away with your hands and disconnect it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door or replace the cover panel.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Speedometer on a Jeep Grand Cherokee
Removing the Speedometer on a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Let’s look at removing the instrument cluster on a Jeep Grand Cherokee along with its components. Release the trim plastic above the steering wheel a…
Remove the Tailgate Panel on the Jeep Grand Cherokee MK2
Remove the Tailgate Panel on the Jeep Grand Cherokee MK2
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Today, you will see how to remove the rear door panel and how to remove the tailgate lock actuator on the second series Jeep Grand Cherokee. First, o…
How to Open the Remote of a Jeep Grand Cherokee
How to Open the Remote of a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Is the remote battery of your Jeep Grand Cherokee flat? Here’s how to open it to replace the battery. Take the Grand Cherokee remote and, using a scr…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos