Do it yourself
Frequently asked questions about cars and motorcycles

Changing the Interior Bulbs of the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Interior dome light bulb

After placing the vehicle on a flat surface or on a ramp for safe and stable access, proceed to remove the small ceiling light found on the vertical left panel of the rear luggage compartment by prying along the perimeter with a screwdriver. Once removed from its housing and the electrical supply disconnected, replacing the bulb is straightforward. Now extract the ceiling light located at the front, centrally, near the windscreen. Pry it off with a screwdriver along the perimeter. Disconnect the electrical supply and separate the black element (which contains the bulb holders and is secured to the visible surface with clips). At this point, you have access to the bulbs and can replace the one you need. Finally, remove the ceiling light in the centre of the roof with your fingers, and after disconnecting the electrical supply, easily replace the bulb from its housing.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Renegade (2014-2026 / 520, MK 1, BU) Do you want to change the headlight bulbs on a Jeep Renegade? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of…
Jeep Renegade (2014-2026 / 520, MK 1, BU) Learn how to replace the front headlight bulbs on a Jeep Renegade. Open the front bonnet by pulling the lever located at the bottom right of the dash…
Jeep Renegade (2014-2026 / 520, MK 1, BU) Let’s see how to replace the damaged bulbs in the interior light of a Jeep Renegade. Use a screwdriver to pry between the interior light and the head…

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos