Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Battery

Video tutorial

Before you can start, open the front bonnet of your Jeep Renegade. Begin by disconnecting the negative terminal by pressing the release clip and pulling it off. Next, unscrew and remove the nut that secures the positive terminal.

Once the securing nut is removed, disconnect the positive terminal. Then, unscrew and remove the bolt that secures the strap holding the battery in place, and remove the strap itself.

At this point, you can extract and remove the battery from its housing, successfully completing the removal.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Jeep Renegade
How to replace the battery of the Jeep Renegade
Jeep Renegade (2014-2023 / ) Below are the step-by-step instructions on how to remove and replace the battery of the Jeep Renegade. First, open the hood of the vehicle and start …
How to Replace the Remote Battery on a Jeep Renegade
How to Replace the Remote Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In today's video, you will see the instructions for disassembling and replacing the battery of the key remote on a Jeep Renegade, in simple steps. Fi…
How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the battery in a Jeep Renegade, open the bonnet to access the engine compartment: the battery is located inside, at the top right near the…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos